A voltage regulating circuit consisting of Zener diode, having break-down voltage of 10 V and maximum power dissipation of 0.4 W, is operated at 15 V. The approximate value of protective resistance in this circuit is ___ Ω.
Every Semiconductor Electronics question JEE Main has set, grouped by the idea it tests rather than the order of the syllabus. 253 questions across 5 distinct ideas. Free to read, answer key on every one.
Questions
253
Distinct ideas
5
Share of marks
4.4%
Difficulty
EASY
A chapter is not one subject — it is a handful of procedures the examiner reuses. These are the ones Semiconductor Electronics questions actually test.
21–40 OF 253 · NEWEST FIRST
A voltage regulating circuit consisting of Zener diode, having break-down voltage of 10 V and maximum power dissipation of 0.4 W, is operated at 15 V. The approximate value of protective resistance in this circuit is ___ Ω.
Find the value of current in the given circuit

Zero
To obtain the given truth table, following logic gate should be placed at G:
OR Gate
AND Gate
NOR Gate
NAND Gate
Consider the following statements: A. The junction area of solar cell is made very narrow compared to a photo diode. B. Solar cells are not connected with any external bias. C. LED is made of lightly doped p-n junction. D. Increase of forward current results in continuous increase of LED light intensity. E. LEDs have to be connected in forward bias for emission of light. Choose the correct answer from the options given below:
B, E Only
B, D, E Only
A, C Only
A, C, E Only
The output of the circuit is low (zero) for:
Choose the correct answer from the options given below:
(B), (C) and (D) only
(A), (B) and (C) only
(A), (C) and (D) only
(A), (B) and (D) only
Choose the correct logic circuit for the given truth table having inputs A and B.





Refer to the circuit diagram given in the figure. which of the following observations are correct?
A. Total resistance of circuit is
B. Current in Ammeter is 1 A
C. Potential across AB is 4 Volts.
D. Potential across CD is 4 Volts
E. Total resistance of the circuit is .
Choose the correct answer from the options given below:

A, B and D Only
A, B and C Only
A, C and D Only
B, C and E Only
The truth table for the circuit given below is :




Which of the following circuits represents a forward biased diode?
Choose the correct answer from the options given below :
(A) and (D) only
(B), (D) and (E) only
(C) and (E) only
(B), (C) and (E) only
The output voltage in the following circuit is (Consider ideal diode case) :

10 V
0 V
+5 V
-5 V
What is the current through the battery in the circuit shown below

1.5 A
0.5 A
0.25 A
1.0 A
Consider the following logic circuit. The output is Y = 0 when :

A = 1 and B = 1
A = 0 and B = 1
A = 1 and B = 0
A = 0 and B = 0
A zener diode with 5V zener voltage is used to regulate an unregulated dc voltage input of 25 V. For a 400 resistor connected in series, the zener current is found to be 4 times load current. The load current () and load resistance () are:
= 20 mA; = 250
= 10 A; = 0.5
= 0.02 mA; = 250
= 10 mA; = 500
In the following circuit, the reading of the ammeter will be (Take Zener breakdown voltage = 4 V)

24 mA
80 mA
10 mA
60 mA
For the circuit shown above, equivalent GATE is :
OR gate
NAND gate
NOT gate
AND gate
The truth table corresponding to the circuit given below is





In the digital circuit shown in the figure, for the given inputs the P and Q values are :

The Boolean expression can be realised with which of the following gate configurations.
A. One 3-input AND gate, 3 NOT gates and one 2-input OR gate, One 2-input AND gate,
B. One 3-input AND gate, 1 NOT gate, One 2-input NOR gate and one 2-input OR gate
C. 3-input OR gate, 3 NOT gates and one 2-input AND gate
Choose the correct answer:
B, C Only
A, B Only
A, B, C Only
A, C Only
Consider a n-type semiconductor in which and are number of electrons and holes, respectively.
(A) Holes are minority carriers
(B) The dopant is a pentavalent atom
(C)
(where is number of electrons or holes in semiconductor when it is intrinsic form)
(D)
(E) The holes are not generated due to the donors
Choose the correct answer from the options given below :
(A), (C), (D) only
(A), (C), (E) only
(A), (B), (E) only
(A), (B), (C) only
Which of the following circuits has the same output as that of the given circuit?





OTHER PHYSICS CHAPTERS