The dimensional formula of ( = permittivity of vacuum and E = electric field) is . The value of = __________.
- A
- B
- C
- D
Every Units, Dimensions & Errors question JEE Main has set, grouped by the idea it tests rather than the order of the syllabus. 223 questions across 4 distinct ideas. Free to read, answer key on every one.
Questions
223
Distinct ideas
4
Share of marks
5.4%
Difficulty
EASY
A chapter is not one subject — it is a handful of procedures the examiner reuses. These are the ones Units, Dimensions & Errors questions actually test.
1–20 OF 223 · NEWEST FIRST
The dimensional formula of ( = permittivity of vacuum and E = electric field) is . The value of = __________.
Match the List-I with List II
Choose the correct answer from the options given below:
A-III, B-IV, C-I, D-II
A-I, B-II, C-III, D-IV
A-IV, B-III, C-I, D-II
A-I, B-IV, C-III, D-II
Match the List I With List II:
Where (Plank's constant), G(gravitational constant) and c (speed of light in vacuum) as fundamental units.
Choose the correct answer from the options given below:
A-II, B-IV, C-I, D-III
A-IV, B-II, C-I, D-III
A-IV, B-I, C-II, D-III
A-III, B-I, C-II, D-IV
The percentage error in the calculated volume of a sphere, if there is 2% error in its diameter measurement, is __________.
1
2
6
8
The density of a uniform cylinder is determined by measuring its mass , length and diameter . The measured values of , and are 97.42 0.02 g, 8.35 0.05 mm and 20.20 0.02 mm, respectively. Calculated percentage fractional error in is _______.
0.63%
0.82%
0.72%
0.25%
A new unit () of length is chosen such that it is equal to the speed of light in vacuum. What is the distance between Venus and Earth in terms of units if light takes 6 min. 40 s to cover this distance?
The diameter of a wire measured by a screw gauge of least count 0.001 cm is 0.08 cm. The length measured by a scale of least count 0.1 cm is 150 cm. When a weight of 100 N is applied to the wire, the extension in length is 0.5 cm, measured by a micrometer of least count 0.001 cm. The error in the measured Young's modulus is N/m. The value of is __________ . (Ignore the contribution of the load to Young's modulus error calculation)
In an experiment to determine the resistance of a given wire using Ohm’s law, the voltmeter and ammeter readings are noted as and , respectively. The least counts of voltmeter and ammeter are and , respectively. The estimated error in the resistance measurement is_______Ω.
Match List - I with List - II.
Choose the correct answer from the options given below :
A-I, B-II, C-III, D-IV
A-IV, B-III, C-II, D-I
A-III, B-IV, C-II, D-I
A-II, B-I, C-IV, D-III
The potential energy of a particle changes with distance from a fixed origin as , where and are constants with appropriate dimensions. The dimensions of are _______.
Consider the equation
Where = magnetic field Intensity ; = electric field, = permittivity, = distance, = time. The values of and respectively are :
1, 1, 1, 1
, and represents physical quantities inductance, capacitance and resistance respectively. The dimensional formula corresponds to _______.
Consider a modified Bernoulli equation.
If t has tile dimension of time then the dimensions of A and B are ___.___ respectively.
To compare EMF of two cells using potentiometer the balancing lengths obtained are 200 cm and 150 cm. The least count of scale is 1 cm. The percentage error in the ratio of EMFs is______
1.55
1.75
1.65
1.17
Dimensions of universal gravitational constant in terms of Planck's constant , distance , mass and time are :
If , E and t represent the free space permittivity, electric field and time respectively, then the unit of will be :
Am
Keeping tl1e significant figures in view, the sum of the physical quantities 52.01 m, 153.2 m and 0.123 m is:
205m
205.333m
205.33 m
205.3m
The speed of a longitudinal wave in a metallic bar is 400 m/s. If the density and Young's modulus of the bar material are increased by 0.5% and 1 %, respectively then the speed of the wave is changed approximately to m/ s.
402
399
401
398
Match the LIST-I with LIST-II
Choose the correct answer from the options given befow:
A-II, B-I, C-IV, D-III
A-II, B-IV, C-I, D-III
A-III, B-II, C-IV, D-I
A-I, B-IV, C-II, D-III
The time period of a simple harmonic oscillator is . Measured value of mass (m) of the object is 10 g with an accuracy of 10 mg and time for 50 oscillations of the spring is found to be 60 s using a watch of 2 s resolution. Percentage error in determination of spring constant (k) is________%.
3.35
3.43
7.60
6.76
OTHER PHYSICS CHAPTERS