RankRizzStart free

Mechanical Properties of Fluids — JEE Main Previous Year Questions

Every Mechanical Properties of Fluids question JEE Main has set, grouped by the idea it tests rather than the order of the syllabus. 193 questions across 9 distinct ideas. Free to read, answer key on every one.

Questions

193

Distinct ideas

9

Share of marks

4.2%

Difficulty

MEDIUM

The ideas inside Mechanical Properties of Fluids

A chapter is not one subject — it is a handful of procedures the examiner reuses. These are the ones Mechanical Properties of Fluids questions actually test.

01Fluid pressure, Pascal's law and accelerated/rotating liquidsset 24×
02Archimedes' principle and floatationset 16×
03Equation of continuity and Bernoulli's theoremset 20×
04Speed of efflux and applications of Bernoulli's theoremset 21×
05Viscosity, Poiseuille's equation and Reynolds numberset 11×
06Stokes' law and terminal velocityset 34×
07Surface tension and surface energyset 28×
08Excess pressure in drops and bubblesset 20×
09Angle of contact and capillary riseset 19×

Every Mechanical Properties of Fluids question

121–140 OF 193 · NEWEST FIRST

JEE MAIN 2021 · 27 JUL S2Speed of efflux and applications of Bernoulli's theoremTRANSCRIBED

The water is filled up to a height of 12 m in a tank having vertical sidewalls. A hole is made in one of the walls at a depth below the water level. The value of for which the emerging stream of water strikes the ground at the maximum range is _________ m.

JEE MAIN 2021 · 24 FEB S1Fluid pressure, Pascal's law and accelerated/rotating liquidsTRANSCRIBED

A hydraulic press can lift 100 kg when a mass is placed on the smaller piston. It can lift ______ kg when the diameter of the larger piston is increased by 4 times and that of the smaller piston is decreased by 4 times keeping the same mass on the smaller piston.

JEE MAIN 2021 · 18 MAR S2Speed of efflux and applications of Bernoulli's theoremTRANSCRIBED

Consider a water tank as shown in the figure. It's cross-sectional area is 0.4 m. The tank has an opening B near the bottom whose cross-section area is 1 cm. A load of 24 kg is applied on the water at the top when the height of the water level is 40 cm above the bottom, the velocity of water coming out the opening B is v m s. The value of , to the nearest integer, is ___. [Take the value of to be 10 m s]

JEE MAIN 2021 · 26 AUG S1Excess pressure in drops and bubblesTRANSCRIBED

A soap bubble of the radius 3 cm is formed inside another soap bubble of radius 6 cm. The radius of an equivalent soap bubble that has the same excess pressure as inside the smaller bubble with respect to the atmospheric pressure is _________ cm.

JEE MAIN 2020 · 03 SEP S1Excess pressure in drops and bubblesTRANSCRIBED

Pressure inside two soap bubbles are 1.01 and 1.02 atmosphere, respectively. The ratio of their volumes is:

  1. A

  2. B

  3. C

  4. D

JEE MAIN 2020 · 02 SEP S2Angle of contact and capillary riseTRANSCRIBED

A capillary tube made of glass of radius 0.15 mm is dipped vertically in a beaker filled with methylene iodide (surface tension = 0.05 N m, density = 667 kg m) which rises to height h in the tube. It is observed that the two tangents drawn from observed that the two tangents drawn from liquid-glass interfaces (from opp. sides of the capillary) make an angle of 60 with one another. Then h is close to (g = 10 m s):

  1. A

    0.049 m

  2. B

    0.087 m

  3. C

    0.137 m

  4. D

    0.172 m

JEE MAIN 2020 · 05 SEP S2Stokes' law and terminal velocityTRANSCRIBED

In an experiment to verify Stokes law, a small spherical ball of radius and density falls under gravity through a distance in air before entering a tank of water. If the terminal velocity of the ball inside water is same as its velocity just before entering the water surface, then the value of is proportional to: (ignore viscosity of air)

  1. A

  2. B

  3. C

  4. D

JEE MAIN 2020 · 09 JAN S1Equation of continuity and Bernoulli's theoremTRANSCRIBED

Water flows in a horizontal tube (see figure). The pressure of water changes by between and where the area of cross section are and , respectively. Find the rate of flow of water through the tube. (density of water )

  1. A

  2. B

  3. C

  4. D

JEE MAIN 2020 · 05 SEP S1Archimedes' principle and floatationTRANSCRIBED

A hollow spherical shell at outer radius floats just submerged under the water surface. The inner radius of the shell is . If the specific gravity of the shell material is with respect to water, the value of is:

  1. A

  2. B

  3. C

  4. D

JEE MAIN 2020 · 07 JAN S2Equation of continuity and Bernoulli's theoremTRANSCRIBED

An ideal fluid flows (laminar flow) through a pipe of non-uniform diameter. The maximum and minimum diameters of the pipes are 6.4 cm and 4.8 cm, respectively. The ratio of the minimum and the maximum velocities of fluid in this pipe is:

  1. A

  2. B

  3. C

  4. D

JEE MAIN 2020 · 04 SEP S1Archimedes' principle and floatationTRANSCRIBED

An air bubble of radius 1 cm in water has an upward acceleration of 9.8 cms. The density of water is 1 gm cm and water offers negligible drag force on the bubble. The mass of the bubble is cm/s.

  1. A

    4.51 gm

  2. B

    3.15 gm

  3. C

    4.15 gm

  4. D

    1.52 gm

JEE MAIN 2020 · 08 JAN S1Archimedes' principle and floatationTRANSCRIBED

A leak proof cylinder of length 1 m, made of a metal which has very low coefficient of expansion is floating vertically in water at 0C such that its height above the water surface is 20 cm. When the temperature of water is increased to 4C, the height of the cylinder above the water surface becomes 21 cm. The density of water at T = 4C, relative to the density at T = 0C is close to:

  1. A

    1.26

  2. B

    1.04

  3. C

    1.01

  4. D

    1.03

JEE MAIN 2020 · 06 SEP S2Equation of continuity and Bernoulli's theoremTRANSCRIBED

A fluid is flowing through a horizontal pipe of varying cross-section, with speed at a point where the pressure is P Pascal. At another point where pressure is Pascal its speed is . If the density of the fluid is and the flow is streamline, then is equal to:

  1. A

  2. B

  3. C

  4. D

JEE MAIN 2020 · 08 JAN S1Archimedes' principle and floatationTRANSCRIBED

Consider a solid sphere of radius and mass density , 0 < r \le R. The minimum density of a liquid in which it will float is:

  1. A

  2. B

  3. C

  4. D

JEE MAIN 2020 · 08 JAN S2Fluid pressure, Pascal's law and accelerated/rotating liquidsTRANSCRIBED

Two liquids of densities and () are filled up behind a square wall of side 10 m as shown in figure. Each liquid has a height of 5 m. The ratio of the forces due to these liquids exerted on upper part MN to that at the lower part NO is (Assume that the liquids are not mixing):

  1. A

  2. B

  3. C

  4. D

JEE MAIN 2020 · 02 SEP S1Fluid pressure, Pascal's law and accelerated/rotating liquidsTRANSCRIBED

A cylindrical vessel containing a liquid is rotated about its axis so that the liquid rises at its sides as shown in the figure. The radius of vessel is 5 cm and the angular speed of rotation is rad s. The difference in the height, h (in cm) of liquid at the Centre of vessel and at the sides of the vessel will be:

image
  1. A

  2. B

  3. C

  4. D

JEE MAIN 2020 · 09 JAN S2Surface tension and surface energyTRANSCRIBED

A small spherical droplet of density is floating exactly half immersed in a liquid of density and surface tension . The radius of the droplet is (take note that the surface tension applies an upward force on the droplet):

  1. A

  2. B

  3. C

  4. D

JEE MAIN 2020 · 04 SEP S2Fluid pressure, Pascal's law and accelerated/rotating liquidsTRANSCRIBED

Two identical cylindrical vessels are kept on the ground and each contain the same liquid of density . The area of the base of both vessels is but the height of liquid in one vessel is and in the other . When both cylinders are connected through a pipe of negligible volume very close to the bottom, the liquid flows from one vessel to the other until it comes to equilibrium at a new height. The change in energy of the system in the process is:

  1. A

  2. B

  3. C

  4. D

JEE MAIN 2020 · 03 SEP S1Angle of contact and capillary riseTRANSCRIBED

When a long glass capillary tube of radius 0.015 cm is dipped in a liquid, the liquid rises to a height of 15 cm within it. If the contact angle between the liquid and glass is close to 0°, the surface tension of the liquid, in milliNewton m, is (Given answer in closed integer)

JEE MAIN 2019 · 10 APR S1Angle of contact and capillary riseTRANSCRIBED

The ratio of surface tensions of mercury and water is given to be 7.5, while the ratio of their densities is 13.6. Their contact angles, with glass, are close to 135° and 0°, respectively. If it is observed that mercury gets depressed by an amount in a capillary tube of radius , while water rises by the same amount in a capillary tube of radius , then the ratio is close to

  1. A

  2. B

  3. C

  4. D