A wooden block is floating in a liquid, 40\ \%\ of its volume is inside the liquid when the vessel is stationary. Percentage of volume immersed when the vessel moves upwards with an acceleration is
- A
60\ \%\
- B
40\ \%\
- C
20\ \%\
- D
33.33\%\
Every Mechanical Properties of Fluids question JEE Main has set, grouped by the idea it tests rather than the order of the syllabus. 193 questions across 9 distinct ideas. Free to read, answer key on every one.
Questions
193
Distinct ideas
9
Share of marks
4.2%
Difficulty
MEDIUM
A chapter is not one subject — it is a handful of procedures the examiner reuses. These are the ones Mechanical Properties of Fluids questions actually test.
21–40 OF 193 · NEWEST FIRST
A wooden block is floating in a liquid, 40\ \%\ of its volume is inside the liquid when the vessel is stationary. Percentage of volume immersed when the vessel moves upwards with an acceleration is
60\ \%\
40\ \%\
20\ \%\
33.33\%\
A small rigid spherical ball of mass M is dropped in a long vertical tube containing glycerine. The velocity of the ball becomes constant after some time. If the density of glycerine is half of the density of the ball, then the viscous force acting on the ball will be (consider g as acceleration due to gravity)
2 Mg
Mg
Consider a completely full cylindrical water tank of height 1.6 m and cross-sectional area 0.5 m. It has a small hole in its side at a height 90 cm from the bottom. Assume, the cross-sectional area of the hole to be negligibly small as compared to that of the water tank. If a load 50 kg is applied at the top surface of the water in the tank then the velocity of the water coming out at the instant when the hole is opened is :
m/s
m/s
m/s
m/s
Two cylindrical vessels of equal cross sectional area of contain water upto height 10 m and 6 m, respectively. If the vessels are connected at their bottom, then the work done by the force of gravity is: (Density of water is and )
J
J
J
J
Two liquids A and B have and as contact angles in a capillary tube. If , then identify the correct statement:
K is negative, then liquid A and liquid B have convex meniscus
K is negative, then liquid A and liquid B have concave meniscus
K is negative, then liquid A has concave meniscus and liquid B has convex meniscus
K is zero, then liquid A has convex meniscus and liquid B has concave meniscus
Two water drops each of radius 'r' coalesce to form a bigger drop. If 'T' is the surface tension, the surface energy released in this process is :
Given below are two statements:
Statement I: The hot water flows faster than cold water
Statement II: Soap water has higher surface tension as compared to fresh water. In the light above statements, choose the correct answer from the options given below
Statement I is true but Statement II is false
Statement I is false but Statement II is true
Both Statement I and Statement II are false
Both Statement I and Statement II are true
Water flows in a horizontal pipe whose one end is closed with a valve. The reading of the pressure gauge attached to the pipe is . The reading of the pressure gauge falls to when the valve is opened. The speed of water flowing in the pipe is proportional to
A capillary tube of radius 0.1 mm is partly dipped in water (surface tension 70 dyn/cm and glass water contact angle ) with inclined with vertical. The length of water risen in the capillary is _____ cm. (Take m/s)
A 400 g solid cube having an edge of length 10 cm floats in water. How much volume of the cube is outside the water ? (Given : density of water )
1400
600
4000
400
The amount of work done to break a big water drop of radius into 27 small drops of equal radius is The work done required to break the same big drop into 64 small drops of equal radius will be:
15 J
5 J
20 J
10 J
In the experiment for measurement of viscosity of given liquid with a ball having radius R, consider following statements. A. Graph between terminal velocity V and R will be a parabola. B. The terminal velocities of different diameter balls are constant for a given liquid. C. Measurement of terminal velocity is dependent on the temperature. D. This experiment can be utilized to assess the density of a given liquid. E. If balls are dropped with some initial speed, the value of will change. Choose the correct answer from the options given below:
A, B and E Only
B, D and E Only
A, C and D Only
C, D and E Only
A solid steel ball of diameter 3.6 mm acquired terminal velocity m/s while falling under gravity through an oil of density . Take density of steel as and g as . The viscosity of the oil in SI unit is
2.18
2.38
1.68
1.99
An air bubble of radius lies at a depth of below the free surface of a liquid of density If the pressure inside the bubble is greater than the atmospheric pressure, then the surface tension of the liquid in SI unit is
0.1
0.05
0.02
0.25
A tube of length L is shown in the figure. The radius of the cross section at point (1) is 2 cm and at point (2) is 1 cm , respectively. If the velocity of water entering at point (1) is 2 m/s, then the velocity of water leaving point (2) will be
4 m/s
2 m/s
6 m/s
8 m/s
Consider following statements: A. Surface tension arises due to extra energy of the molecules at the interior as compared to the molecules at the surface, of a liquid. B. As the temperature of liquid rises, the coefficient of viscosity increases. C. As the temperature of gas increases, the coefficient of viscosity increases D. The onset of turbulence is determined by Reynold's number. E. In a steady flow two stream lines never intersect. Choose the correct answer from the options given below:
C, D, E Only
A, D, E Only
B, C, D Only
A, B, C Only
In a hydraulic lift, the surface area of the input piston is and that of the output piston is . If 100 N force is applied to the input piston to raise the output piston by 20 cm, then the work done is _______ kJ.
A vessel with square cross-section and height of 6 m is vertically partitioned. A small window of 100 cm with hinged door is fitted at a depth of 3 m in the partition wall. One part of the vessel is filled completely with water and the other side is filled with the liquid having density kg/m. What force one needs to apply on the hinged door so that it does not get opened?
(Acceleration due to gravity = 10 m/s)
Two soap bubbles of radius 2 cm and 4 cm , respectively, are in contact with each other. The radius of curvature of the common surface, in cm , is ________ .
The excess pressure inside a soap bubble A in air is half the excess pressure inside another soap bubble B in air. If the volume of the bubble A is times the volume of the bubble B, then the value of n is ________.
OTHER PHYSICS CHAPTERS